Updated!

@Xpander What Mem clock you running ?

@manero666 Not sure on that issue tbh. Know of any others with the same problem ?

Updated!

@Xpander What Mem clock you running ?

4 sticks, cant get over 2666mhz atm, with CL15..
with the latest bios i can change some ohms in ram timings though and can fiddle with more settings, but have been lazy to try out.. might squeeze more speed out of those rams.

with 2 sticks i was easily able to run them at 2933mhz and CL14

Just an updated run after a few tweaks.

@GNU_BLIND what are your computer specs? Motherboard/ Ram?

+120 core +400 mem


cant get core over that, it will start throwing random colors :D

@GNU_BLIND what are your computer specs? Motherboard/ Ram?

Ryzen 1700 @ 3.9GHz
MSI b350m gaming pro
Gskill flare X 3200MHz ddr4 @ 3200MHz
MSI GTX 1080 ti FE +150 core +400 memory

@manero666 Not sure on that issue tbh. Know of any others with the same problem ?

Nope, that's why I posted it here, to understand if some other Mesa users suffer the same issue..

Too bad Yaroslav Andrusyak isn't posting any videos on YT, he sure would've had an answer for that.

I'll update when liam's finished playing with the site :P

Updated

381.22 drivers, core +120, mem +400



edit:
Update

cant beat sterky's score result :D

core +125, mem +450



i get freezes with core +140, core +130 does the test but lots of artefacts and less performance

With 381.22 driver.
GPU core +155, mem +395

Updated :D

Interesting. :) Last time I ran this was on openSUSE Leap with 4.4 kernel and 375.39 drivers. Got 1279 then. Quite the improvement considering no hardware has changed. :)


Still pretty bad for the GPU you have.. should be o. The range of 1700 pts.

Still pretty bad for the GPU you have.. should be o. The range of 1700 pts.

Yeah, my cpu is definitely a bottleneck.

Still pretty bad for the GPU you have.. should be o. The range of 1700 pts.

Yeah, my cpu is definitely a bottleneck.

i really doubt that, this benchmark on extreme settings is so GPU bound that cpu shouldn't matter at all

Still pretty bad for the GPU you have.. should be o. The range of 1700 pts.

Yeah, my cpu is definitely a bottleneck.

i really doubt that, this benchmark on extreme settings is so GPU bound that cpu shouldn't matter at all

Just look at the other 970 results in the original post. The ones that did better than me all had i5's/i7's.

FX cpu should still be fine for this. if you look at the GTX 1060 results, FX 6300 is up on bar with i5s and i7s.. in this bench CPU doesnt matter. its something with your card or system. AKA thermal throttling or running in lower PCI-E speeds or having some software(composite etc) that will affect the performance.

Updated to 4.12 kernel and Mesa 17.2-devel.

Not much in terms of FPS, but a huge improvement in smoothness.

Updated