Been a while since I changed wallpapers.

Radiskull and Devil Doll present Halloween in Canada:

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.



Last edited by Bilskirnir3124 on 25 November 2023 at 5:52 am UTC

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.

To protect your privacy, external media requires approval to load. Source: i.ibb.co
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

If you don't mind my asking, do you mean you have two iVPN icons because you're running two active connections, or that it's duplicating itself?

If it's two simultaneous VPN connections you're after, there is a better way, with or without NetworkManager (NM).

Also, if you're system has NM installed, you can add iVPN/Mullvad/AirVPN (etc) directly to it, reducing the need for the extra application.

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.

To protect your privacy, external media requires approval to load. Source: i.ibb.co
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

If you don't mind my asking, do you mean you have two iVPN icons because you're running two active connections, or that it's duplicating itself?

If it's two simultaneous VPN connections you're after, there is a better way, with or without NetworkManager (NM).

Also, if you're system has NM installed, you can add iVPN/Mullvad/AirVPN (etc) directly to it, reducing the need for the extra application.

It's not duplicate iVPN installations/connections. It's an icon issue. That's Bitwarden for some reason using iVPN's icon. That is very good to know thought. I do use NM to manage connections. I intend to try out Mullvad sometime so I might try that method out.

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.

To protect your privacy, external media requires approval to load. Source: i.ibb.co
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

If you don't mind my asking, do you mean you have two iVPN icons because you're running two active connections, or that it's duplicating itself?

If it's two simultaneous VPN connections you're after, there is a better way, with or without NetworkManager (NM).

Also, if you're system has NM installed, you can add iVPN/Mullvad/AirVPN (etc) directly to it, reducing the need for the extra application.

It's not duplicate iVPN installations/connections. It's an icon issue. That's Bitwarden for some reason using iVPN's icon. That is very good to know thought. I do use NM to manage connections. I intend to try out Mullvad sometime so I might try that method out.

This is quite off-topic for this thread, so I'll keep this brief.

Both iVPN and Mullvad can be configured directly through NM. I don't currently have iVPN however, for Mullvad you download the wireguard config from their "WireGuard configuration file generator".

Check the file is valid, it should have configuration sections of [Interface] and [Peer] at least. If you can get the same type of file from iVPN then the rest of this process is the same.

As root, change to the directory where it was downloaded, for example if you put it in ~/Downloads:
 
root $ cd /home/(your user)/Downloads

And now import it:

 
root $ nmcli connection import type wireguard file (conf file name).conf

Do note that you need to change (your user) and (conf file name) to match your local system. For example, if the file downloaded as au-bne-wg-301.conf, then you would run

 
root $ nmcli connection import type wireguard file au-bne-wg-301.conf

And you're done! You should now have the VPN imported, it probably also got activated by NM. At this point you can use NM to change a few bits (be careful not to break anything important!) such as whether it activates on boot and such.

Enjoy!

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.

To protect your privacy, external media requires approval to load. Source: i.ibb.co
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

If you don't mind my asking, do you mean you have two iVPN icons because you're running two active connections, or that it's duplicating itself?

If it's two simultaneous VPN connections you're after, there is a better way, with or without NetworkManager (NM).

Also, if you're system has NM installed, you can add iVPN/Mullvad/AirVPN (etc) directly to it, reducing the need for the extra application.

It's not duplicate iVPN installations/connections. It's an icon issue. That's Bitwarden for some reason using iVPN's icon. That is very good to know thought. I do use NM to manage connections. I intend to try out Mullvad sometime so I might try that method out.

This is quite off-topic for this thread, so I'll keep this brief.

Both iVPN and Mullvad can be configured directly through NM. I don't currently have iVPN however, for Mullvad you download the wireguard config from their "WireGuard configuration file generator".

Check the file is valid, it should have configuration sections of [Interface] and [Peer] at least. If you can get the same type of file from iVPN then the rest of this process is the same.

As root, change to the directory where it was downloaded, for example if you put it in ~/Downloads:
 
root $ cd /home/(your user)/Downloads

And now import it:

 
root $ nmcli connection import type wireguard file (conf file name).conf

Do note that you need to change (your user) and (conf file name) to match your local system. For example, if the file downloaded as au-bne-wg-301.conf, then you would run

 
root $ nmcli connection import type wireguard file au-bne-wg-301.conf

And you're done! You should now have the VPN imported, it probably also got activated by NM. At this point you can use NM to change a few bits (be careful not to break anything important!) such as whether it activates on boot and such.

Enjoy!

Thanks for the info. I'll give it a spin. Sorry for starting a minor derail.

Not a fresh desktop anymore, but it's less than a week old. The second IVPN systray icon you'll see there is actually Bitwarden. Having the same issue on my laptop which is running the same distro and DE. Running Arch Linux and MATE.

To protect your privacy, external media requires approval to load. Source: i.ibb.co
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

If you don't mind my asking, do you mean you have two iVPN icons because you're running two active connections, or that it's duplicating itself?

If it's two simultaneous VPN connections you're after, there is a better way, with or without NetworkManager (NM).

Also, if you're system has NM installed, you can add iVPN/Mullvad/AirVPN (etc) directly to it, reducing the need for the extra application.

It's not duplicate iVPN installations/connections. It's an icon issue. That's Bitwarden for some reason using iVPN's icon. That is very good to know thought. I do use NM to manage connections. I intend to try out Mullvad sometime so I might try that method out.

This is quite off-topic for this thread, so I'll keep this brief.

Both iVPN and Mullvad can be configured directly through NM. I don't currently have iVPN however, for Mullvad you download the wireguard config from their "WireGuard configuration file generator".

Check the file is valid, it should have configuration sections of [Interface] and [Peer] at least. If you can get the same type of file from iVPN then the rest of this process is the same.

As root, change to the directory where it was downloaded, for example if you put it in ~/Downloads:
 
root $ cd /home/(your user)/Downloads

And now import it:

 
root $ nmcli connection import type wireguard file (conf file name).conf

Do note that you need to change (your user) and (conf file name) to match your local system. For example, if the file downloaded as au-bne-wg-301.conf, then you would run

 
root $ nmcli connection import type wireguard file au-bne-wg-301.conf

And you're done! You should now have the VPN imported, it probably also got activated by NM. At this point you can use NM to change a few bits (be careful not to break anything important!) such as whether it activates on boot and such.

Enjoy!

Thanks for the info. I'll give it a spin. Sorry for starting a minor derail.

No worries, it was my fault.

Darkwing Duck! Let's get dangerous!

Time for a blue theme.

I had to uninstall all the Shadowgrounds games to make room for BioShock Infinte, so I brought my desktop icons back for November even with the smaller screen.



Not that I spent more than an evening playing BioShock Infinite so far, but it did show off my newer hardware at least.

Last edited by Hamish on 28 November 2023 at 10:02 pm UTC

Moved from Arch to NixOS and to cut down on the amount of config files to convert to Home-Manager/Nix, I skipped moving over my bspwm config and am using KDE Plasma for the time being. Gotta say though, those desktop widgets are quite pretty, though not entirely useful when I never actually see my desktop.

Wallpaper link (though mine is edited)

Watch out for The Glitch!

To protect your privacy, external media requires approval to load. Source: i.imgur.com
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

Watch out for The Glitch!

Is that a scene from the Pixels movie????.......

Is that a scene from the Pixels movie????.......

Nah, it's Steam Trading Card art ("Inky, Blinky, Pinky & Clyde") from Pac-Man 256. Great little game, and it's always nice to see a big gaming brand like that having a native Linux presence.

To protect your privacy, external media requires approval to load. Source: i.postimg.cc
View cookie preferences.
Accept & Show Accept All & Don't show this again   Direct Link

kind of looks like cosmic destkop. is that popOS ?

Not much has changed in terms of my desktop setup, only that I'm using Ubuntu instead of Nobara.

It's nice to be back on Ubuntu, to be back after so many years. Overall, I like it. I think the hate Ubuntu gets is way overblown. Compared to the other distros, it just makes my life easier.

kind of looks like cosmic destkop. is that popOS ?

Yeah! I love POP OS!

PCLinuxOS, XFCE and F2FS as a root partition


ROSA Fresh Desktop 12.4, LXQt and XFS as a root partition