Check out our Monthly Survey Page to see what our users are running.
We do often include affiliate links to earn us some pennies. See more here.

For those looking to splash out a bit on a new desktop, the Linux hardware vendor Entroware have unleashed Hades, a powerful new desktop computer with Linux pre-loaded.

This is their first AMD Ryzen powered desktop with multiple choices between the CPU and GPU, although they're still only providing NVIDIA GPUs with the Hades. For those looking at the ultimate performance, they've gone with the AMD Threadripper so it really is a bit of a beast.

  • CPU Options: Ryzen TR 1900x up to Ryzen TR 2990WX
  • GPU Options: NVIDIA® GT 1030, RTX 2070, RTX 2080 or RTX 2080 Ti Graphics
  • RAM: 16GB DDR4 2933MHz up to 128GB DDR4 (with 2400MHz ECC options)
  • Front Ports: 2 x USB Hi-Speed 2.0, 2 x USB SuperSpeed 3.0, 1 x USB SuperSpeed 3.0 Type-C, 1 x Headphone Jack, 1 x Microphone Jack
  • Rear Ports: 1 x PS/2 Keyboard/Mouse Combo, 8 x USB SuperSpeed 3.1, 1 x USB SuperSpeed 3.1 10Gbps, 1 x USB SuperSpeed 3.1 10Gbps Type-C, 5 x Audio Jacks (Line In, Line Out, Mic In, Rear Speaker Out, Centre Speaker Out), 2 x RJ-45 Ethernet, 2 x WiFi Antenna Connector, 1 x Power Connector

It also comes with Bluetooth support built-in as well, so that's sweet.

Operating system choices are somewhat limited, with Entroware focusing on Ubuntu and Ubuntu MATE either 18.04 LTS (Long-term support) or 18.10. The more options they add in though, the more time consuming it would be so it's not a major issue. Anyone using other distributions likely know exactly what they're doing anyway.

You will need to dig deep though, since the price starts at £1,599.99. You can't pay for a top unit on the cheap though, it pays to future-proof yourself as much as possible of course. Still, it's quite high.

For shipping, they're currently available to people in the United Kingdom, Republic of Ireland, France, Germany, Italy and Spain.

I personally tested a laptop Entroware sent over back in 2015 and I was very impressed with them. For those outside the US they seem like a pretty decent company to go with for Linux hardware. While I usually build desktops myself from parts, for a laptop Entroware will absolutely be my go-to company. Even so, the Hades is an impressive unit.

Find out more about Hades on the Entroware site.

Article taken from GamingOnLinux.com.
Tags: Hardware
12 Likes
About the author -
author picture
I am the owner of GamingOnLinux. After discovering Linux back in the days of Mandrake in 2003, I constantly checked on the progress of Linux until Ubuntu appeared on the scene and it helped me to really love it. You can reach me easily by emailing GamingOnLinux directly.
See more from me
The comments on this article are closed.
26 comments
Page: 1/2»
  Go to:

FutureSuture Jan 14, 2019
I like what I see! Why are the GPU options all Nvidia, though? That is the only part I do not like. If I am spending that kind of money, I would want it going to the company actively developing an open source graphics driver on Linux.
brokkr Jan 14, 2019
Quoting: GuestLooks really good. But...if i would buy one i would want an AMD GPU sooo. Remind me when they offer AMD and not only Nvidia.

If you just want the case, it's definitely a Fractal Design one. With those dimensions, I'd say probably the Fractal Define C.
Solitary Jan 14, 2019
Quoting: brokkrIf you just want the case, it's definitely a Fractal Design one. With those dimensions, I'd say probably the Fractal Define C.

Actually it looks like Fractal Define R6, check the side of the front doors, there is space to put your fingers in, Defince C does not have front doors. The front I/O also looks different. This is definitely R6.
Kristian Jan 14, 2019
" 1 x PS/2 Keyboard/Mouse Combo"

I thought everyone had long since moved on to USB for these things.
Tuxee Jan 14, 2019
With a 500GB SSD and a GTX2070 (and an otherwise minimal configuration) you end up around 2,500 Euros. An absurd price. CPU and graphics card come for a mere 900 Euros, which means mainboard, RAM, cooler, mass storage, case and power supply (and assembly) add another 1,600...
wvstolzing Jan 14, 2019
Quoting: Kristian" 1 x PS/2 Keyboard/Mouse Combo"

I thought everyone had long since moved on to USB for these things.

PS/2 keyboards are supposed to have lower latency. A more tangible reason, though, is that USB keyboards are sometimes late to get recognized by the system during bootup, so you can't hit the key that's supposed to take you to the BIOS. My USB keyboard (Unicomp Model M clone) often doesn't even 'turn on' on the grub boot selection screen, which can get really frustrating.
CFWhitman Jan 14, 2019
Quoting: wvstolzing
Quoting: Kristian" 1 x PS/2 Keyboard/Mouse Combo"

I thought everyone had long since moved on to USB for these things.

PS/2 keyboards are supposed to have lower latency. A more tangible reason, though, is that USB keyboards are sometimes late to get recognized by the system during bootup, so you can't hit the key that's supposed to take you to the BIOS. My USB keyboard (Unicomp Model M clone) often doesn't even 'turn on' on the grub boot selection screen, which can get really frustrating.

That's definitely an issue even on newer computers with PS/2 ports. However, I've found that motherboards/computers lacking PS/2 ports work fine in firmware with USB keyboards (because they have to). Before USB 2, USB keyboards and mice definitely used more than their share of system resources, but that hasn't really been the case for quite a while now.


Last edited by CFWhitman on 14 January 2019 at 3:42 pm UTC
CFWhitman Jan 14, 2019
Quoting: GuestThreadripper CPUs are for servers and overkill for a gaming PC: best gaming cpus

This article is written from a Windows-centric viewpoint (understandably so from a mainstream site). Vulkan graphics benefit more from extra threads. However, the biggest reason to consider AMD CPUs is that they are better bang for the buck processors, and that benefit is pretty much erased if you are going to buy from a computer vendor that charges a premium like Entroware.
wintermute Jan 14, 2019
Quoting: TuxeeWith a 500GB SSD and a GTX2070 (and an otherwise minimal configuration) you end up around 2,500 Euros. An absurd price.

I did an equivalent spec machine on PC Specialist and, even with some 'expensive' components like Samsung SSDs, PC Specialist came out £300 cheaper. I don't mind paying a bit extra to support Linux and Open Source, but if that's their angle they really should offer AMD graphics cards as an option.
Sojiro84 Jan 14, 2019
Best part is, as far as I can see from the pictures, it has no obnoxious rgb lightning and all that useless crap.

Also, converted to euro's it seems like I might use it somewhere in the middle of the year. My PC is from 2012 so it is due for a upgrade, although my GTX 1080 still performs perfectly even in 4K resolutions (with settings tweaked off course).
dpanter Jan 14, 2019
This pleases my Scandinavian aesthetic senses. ^_^
I'll give them a pass on the Nvidia nonsense and a slightly raised eyebrow at the prices. I'll just leave a note here; there will always be an extra cost involved when buying a pre-assembled PC vs buying parts and building it yourself, that's the nature of the beast.
adamhm Jan 14, 2019
The conversation about PS/2 keyboards here reminds me of a funny post I saw a while ago: https://old.reddit.com/r/pcmasterrace/comments/7t6zpu/anon_on_keyboards/

Anyway, I personally wouldn't buy a prebuilt desktop system (it's easy enough & much cheaper + more fun to build it yourself and you have a lot more choice/control over what parts go into it), but I'd be very interested in a good Ryzen laptop. I got an Entroware laptop for my mother almost two years ago & it's generally been very good so far; more than enough for what she uses it for. That said, I was unimpressed by their choice of SSD (made by a manufacturer I've never heard of before: Biwin) - it became noticeably slower over time, and recently had to be replaced as it started showing signs of failure (severe slowdowns + SMART data reporting lots of errors).
wintermute Jan 14, 2019
Quoting: dpanterthere will always be an extra cost involved when buying a pre-assembled PC vs buying parts and building it yourself, that's the nature of the beast.

The issue I have is that it's significantly more expensive than PC Specialist, not that it's significantly more expensive than building it myself. I am at the stage in life where I'm quite happy to exchange money for time spent fiddling with tiny screws.
Avehicle7887 Jan 14, 2019
I think they go with Nvidia because they have somewhat flexible and straight forward drivers and on their distros of choice (Ubuntu family) they're easily upgradeable.

Before I am assaulted by AMD users: I'm not being (or trying) to be a fanboy, it's just the way things, are. They're probably aware that with AMD it's a bit more complicated to upgrade drivers (having to add unofficial PPA's for starters) and that might also increase support costs for their company.

I think if Canonical upgraded the GPU drivers regularly things might be different.
cRaZy-bisCuiT Jan 14, 2019
Are they kidding?
Solitary Jan 14, 2019
Quoting: GuestThis is exactly like mine, except it has USB Type-C where mine is a few years old and just has 2.0 and 3.0 on the top. I really like Fractal cases a lot!

If I lived where they shipped I'd be looking at these once the new Raedon VII is out and hopefully and options. As is I keep an eye on System 76 for being in the US.

Yes, Fractal Design R models are very nice cases. I myself have the old R3, it has only USB 2.0 in front :) not that I would really need any better. Next case is also gonna be Fractal.
Ehvis Jan 14, 2019
View PC info
  • Supporter Plus
Almost the same case as I just built my new PC in. Quite a premium on the higher powered models though. I understand that having something pre-built and pre-installed is worth something, but it looked about 40% overpriced. Maybe the low GBP is making computer components extra expensive in the UK.
Shmerl Jan 14, 2019
Quoting: Avehicle7887I think if Canonical upgraded the GPU drivers regularly things might be different.

It's surprising Canonical didn't take care of providing gamers oriented preset, where kernel and Mesa are kept up to date by default. I suppose they expect that gamers aren't going to use Ubuntu in general, and would focus on rolling distros for the most part? If this PC is oriented on gamers, may be they should sell it with a rolling distro to begin with.

Personally, I also like buying components and assembling them myself, instead of getting a pre-assembled PC. An option in between are stores which assemble a custom PC for you, based on your components specification.


Last edited by Shmerl on 14 January 2019 at 10:37 pm UTC
TheRiddick Jan 15, 2019
Looks like my old Antec P180 case or whatever it was...


Last edited by TheRiddick on 15 January 2019 at 7:17 am UTC
theghost Jan 15, 2019
Quoting: Solitary
Quoting: brokkrIf you just want the case, it's definitely a Fractal Design one. With those dimensions, I'd say probably the Fractal Define C.

Actually it looks like Fractal Define R6, check the side of the front doors, there is space to put your fingers in, Defince C does not have front doors. The front I/O also looks different. This is definitely R6.

The Fractal Define R6 is such a great case <3, only the case fans are not so silent.
While you're here, please consider supporting GamingOnLinux on:

Reward Tiers: Patreon. Plain Donations: PayPal.

This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
The comments on this article are closed.