AMD reveal more on FidelityFX Super Resolution 2.0 (FSR)

I want to see comparison with FSR1 as it works fairly well and curious that they don't have "ultra quality" mode

i wonder why they don't have support for 2880 x 1620 or 3200 x 1800 ? Surely there is room for those who just want a minimal drop in quality and another 10 - 15 fps to nudge their 4k experience from 45-50 to 60fps. After all at 1440p scaled to 4k no matter how good FSR 2.0 is an 'ultra quality' and an 'extreme' mode would surely almost become imperceptible at 4k.

Right now i can force FSR1.0 in the steam launch commands and any game i manage to get it working with (not as many as i would like tbh) it offers me up those two resolutions above and the quality drop even without integrating it into the game engine is minimal and i do notice a definite frame rate boost, in fact oddly it can look almost better with the contrast adaptive sharpening.


Last edited by Lofty on 24 March 2022 at 8:34 pm UTC

On the screenshot, if you watch it full picture, and look the first face on the foreground, you can better compare native to other FSR. You can observe how it alterate the overall image.

I prefer having real resolution upscale, even for a performance loss, than having performance increase for graphic quality loss. There are enough graphical setting in most game that allow you to balance your fps. And in other scenario when you have too much perf, you rather have resolution upscale for real graphic improvement (imo)

Quoting: JahimselfOn the screenshot, if you watch it full picture, and look the first face on the foreground, you can better compare native to other FSR. You can observe how it alterate the overall image.

I prefer having real resolution upscale, even for a performance loss, than having performance increase for graphic quality loss. There are enough graphical setting in most game that allow you to balance your fps. And in other scenario when you have too much perf, you rather have resolution upscale for real graphic improvement (imo)

I dunno, except maybe for movie-style cutscenes, graphical detail levels in games passed the point where I don't care any more years ago. So for me, as long as it doesn't degrade back down to pixel-art levels, more speed for a bit less detail is something for nothing.

Quoting: Purple Library Guy

Quoting: JahimselfOn the screenshot, if you watch it full picture, and look the first face on the foreground, you can better compare native to other FSR. You can observe how it alterate the overall image.

I prefer having real resolution upscale, even for a performance loss, than having performance increase for graphic quality loss. There are enough graphical setting in most game that allow you to balance your fps. And in other scenario when you have too much perf, you rather have resolution upscale for real graphic improvement (imo)

I dunno, except maybe for movie-style cutscenes, graphical detail levels in games passed the point where I don't care any more years ago. So for me, as long as it doesn't degrade back down to pixel-art levels, more speed for a bit less detail is something for nothing.

Agreed, I'd say for about the last 5 years or so now, it's not just the amount of polygons we're pushing, or the resolution of the textures, but the overall level of detail in characters, environments, animations, the quality of lighting and the post processing of 3D graphics in games has reached a point where everything looks pretty amazing at just about any resolution or quality setting to be honest.

Anything extra on top now is just more cake icing on top of cake icing.

I still remember people losing their mind over how far graphics advanced with the 'PS3 quality' era of games, and we've now reached the point where 'PS4 quality' games can run on a handheld PC.

Graphics are officially at the point where 'they're good enough' for me. I just want decent battery life and stable frame rates now.

Im a bit confused with some of the above posts but maybe im misinterpreting them ( it happens )

The benefit of FSR (and in today in game engines that now don't actually change your monitors resolution on game for this reason) is that you don't have to drop your physical resolution on your monitor, as LCD's are notoriously bad at scaling images and look terrible vs CRT when running lower resolutions. That really is one of the biggest points of FSR, if everybody still ran quality CRT's monitors you could run games at lower resolutions and still get excellent perceived real world fidelity and high frame rates simply by dropping the resolution.. no need for FSR.

In game (")graphics(") are separate to real world monitor fidelity (a pixel game is still graphics). Once you are running 1:1 pixel mapped resolution over a digital (HDMi / DisaplyPort ) connector with zero loss you have max fidelity for that panel. And because of the need to run an LCD at it's native resolution in order to stop the panel applying bi-linear filtering of your image (like those smudge filters you get on Retroarch) and because of the trend for 1440p to be the new 1080p that's your new base line performance target. Not to mention the new influx of cheaper 144hz/165hz and soon to be 240hz 4K monitors which all require huge amounts of power to run at native resolution.. FSR / DLSS is the workaround.

Of course there are a few rare bespoke monitors with integer scaling options that bypasses the bi-linear filter but you can actually run integer scaling on Linux using a command like: WINE_FULLSCREEN_INTEGER_SCALING=1 and run your game fullscreen at 1/4 of the resolution of the actual game, and if you can't put up with the chunky pixel graphics you will see why you need bi-linear filtering on monitors on a modern game, but you will also see how crisp and clear the pixelated graphics are because no scaling outside of the monitors physical pixel grid was required.

So yea, graphics aren't monitor fidelity actually both go hand in hand. FSR is a really usefull tool and there should be an "ultra" mode and an "uber" mode (Ultra: 2880 x 1620 Uber: 3200 x 1800 (or extreme mode) for those on 4k monitors so they don't have to drop all the way down 67% to 1440p to get some FPS benefits.

Quoting: LoftyIm a bit confused with some of the above posts but maybe im misinterpreting them ( it happens )

In game (")graphics(") are separate to real world monitor fidelity (a pixel game is still graphics). Once you are running 1:1 pixel mapped resolution over a digital (HDMi / DisaplyPort ) connector with zero loss you have max fidelity for that panel.

Right, so to clear up that misinterpretaton you mentioned, when I said "as long as it doesn't degrade back down to pixel-art levels" I meant "As long as it doesn't start looking like those retro games which make blocky little characters intended to look like pixels used to in the early 90s but obviously don't any more". So your whole learned disquisition on what pixel graphics is and isn't was somewhat beside the thrust of what I was saying.

I was trying to say "I don't mind a bit of reduction in visual fidelity unless it gets really extreme". I was trying to say it in a mildly amusing way; evidently I failed. Clearer?


Last edited by Purple Library Guy on 25 March 2022 at 2:03 am UTC

Quoting: Purple Library Guy

Quoting: LoftyIm a bit confused with some of the above posts but maybe im misinterpreting them ( it happens )

In game (")graphics(") are separate to real world monitor fidelity (a pixel game is still graphics). Once you are running 1:1 pixel mapped resolution over a digital (HDMi / DisaplyPort ) connector with zero loss you have max fidelity for that panel.

Right, so to clear up that misinterpretaton you mentioned, when I said "as long as it doesn't degrade back down to pixel-art levels" I meant "As long as it doesn't start looking like those retro games which make blocky little characters intended to look like pixels used to in the early 90s but obviously don't any more". So your whole learned disquisition on what pixel graphics is and isn't was somewhat beside the thrust of what I was saying.

I was trying to say "I don't mind a bit of reduction in visual fidelity unless it gets really extreme". I was trying to say it in a mildly amusing way; evidently I failed. Clearer?

evidently.

Quoting: gradyvuckovic

Quoting: Purple Library GuyI dunno, except maybe for movie-style cutscenes, graphical detail levels in games passed the point where I don't care any more years ago. So for me, as long as it doesn't degrade back down to pixel-art levels, more speed for a bit less detail is something for nothing.

Agreed, I'd say for about the last 5 years or so now, it's not just the amount of polygons we're pushing, or the resolution of the textures, but the overall level of detail in characters, environments, animations, the quality of lighting and the post processing of 3D graphics in games has reached a point where everything looks pretty amazing at just about any resolution or quality setting to be honest.

Sometimes, I looked at the high and not-so-high quality settings screenshots in games magazines and couldn't tell which was which without reading the accompanying text.

(... and still wanted to have max quality settings. X) )

Quoting: JahimselfOn the screenshot, if you watch it full picture, and look the first face on the foreground, you can better compare native to other FSR. You can observe how it alterate the overall image.

The white bit with the "carbon fiber" texture? yeah I did wonder why the 'quality' seems to double the size of the pattern not of the other seems to do that.