Viewing topic Anyone with Asrock X570 Taichi - can you see chipset temperature? - Page: 2

Anyone with Asrock X570 Taichi - can you see chipset temperature?

Page: «2/2

Shmerl Sep 8, 2019

Link

Drivers wise, it's hard to say yet. The Witcher 3 in Wine+dxvk works well so far (I posted results in TW3 thread. So radv seems to work for it.

Something like The Bard's Tale IV for example hanged altogether. Possibly due to radeonsi for Navi still being rather fresh.

0 Likes

buono Sep 10, 2019

Link

Supporter Plus

View PC info

Thanks Shmerl, I appreciate the feedback.

0 Likes

pete910 Oct 6, 2019

Link

Supporter Plus

View PC info

@Shmerl

Finally got round to installing my x570t/3900x

This is what I've got up to now, Not sure if you've sussed yours since your last posts.

iwlwifi-virtual-0

Adapter: Virtual device

temp1:            N/A  



k10temp-pci-00c3

Adapter: PCI adapter

Tdie:         +36.4°C  (high = +70.0°C)                                         CPU Tdie

Tctl:         +36.4°C                                                           CPU Tctl



amdgpu-pci-1000

Adapter: PCI adapter

vddgfx:      737.00 mV 

fan1:           0 RPM  (min =    0 RPM, max = 3850 RPM)

edge:         +31.0°C  (crit = +100.0°C, hyst = -273.1°C)                       GPU

                       (emerg = +105.0°C)

junction:     +35.0°C  (crit = +110.0°C, hyst = -273.1°C)                       Junction

                       (emerg = +115.0°C)

mem:          +32.0°C  (crit = +94.0°C, hyst = -273.1°C)                        HBM Mem Temp

                       (emerg = +99.0°C)

power1:       24.00 W  (cap = 250.00 W)                                         Power



nct6798-isa-0290

in0:                   496.00 mV (min =  +0.00 V, max =  +1.74 V)

in1:                     1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in2:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM 

in3:                     3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        

in4:                     1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in5:                     1.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        CPU_VDDCR_SOC

in6:                     1.35 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        Dram

in7:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in8:                     3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in9:                     1.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in10:                    1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in11:                  624.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM

in12:                    1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        PREM_VDDCR_SOC

in13:                  928.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM        VDDP

in14:                  904.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM

fan1:                     0 RPM  (min =    0 RPM)

fan2:                   699 RPM  (min =    0 RPM)                               CPU FAN 1

fan3:                     0 RPM  (min =    0 RPM)                               Chassis Fan 1

fan4:                   349 RPM  (min =    0 RPM)

fan5:                  1283 RPM  (min =    0 RPM)                               Water Pump                              

fan6:                  1305 RPM  (min =    0 RPM)                               SB_Fan                                 

fan7:                     0 RPM  (min =    0 RPM)

SYSTIN:                 +29.5°C    sensor = thermistor

CPUTIN:                 +30.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

AUXTIN0:                 +8.0°C    sensor = thermistor

AUXTIN1:                -61.0°C    sensor = thermistor

AUXTIN2:                +13.0°C    sensor = thermistor

AUXTIN3:                +31.0°C    sensor = thermistor

SMBUSMASTER 1:          +50.0°C  (high = +105.0°C, hyst = +95.0°C)

SMBUSMASTER 0:          +36.0°C  

PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  

PCH_CHIP_TEMP:           +0.0°C  

intrusion0:            ALARM

intrusion1:            ALARM

beep_enable:           disabled

Not sure if the Water pump and south bridge fans are the right way round.

1 Likes, Who?

Shmerl Oct 6, 2019

Link

View PC info

Yes, k10temp works fine now in 5.4-rc1+ for me. No need to patch it manually. Chipset temperature is SMBUSMASTER 1 for me.

0 Likes

pete910 Oct 6, 2019

Link

Supporter Plus

View PC info

Quoting: ShmerlYes, k10temp works fine now in 5.4-rc1+ for me. No need to patch it manually. Chipset temperature is SMBUSMASTER 1 for me.

Me too, Not sure why I didn't add that

I used zenpower-git from the AUR to get K10temps

There's no data sheet for the NCT 6798 yet so no idea what to do the scaler at for the 12v rail ect

I think in7 is 3VSB, in8 is VBat and int 3 being 3VVC

0 Likes

pete910 Oct 6, 2019

Link

Supporter Plus

View PC info

To add I think SMBUSMASTER 0: is CPU temp too

0 Likes

hephaestus Dec 4, 2019

Link

Quoting: ShmerlSapphire Pulse RX 5700XT by default has very passive fans profile, and runs quite hot on idle. Using radeon-profile I enabled better cooling fan curve, and chipset temperature went down! GPU is basically right in front of the flat heatsink on X570 Taichi, and when it's hot, it affects everything from the chipset to nvme drive that sit under that metal plate).

Hi Shmerl, I found this thread while Googling about the same problem.

What sort of chipset temperatures were you able to achieve by adjust the fan curve? I'm also getting 59 to 60 C chipset temps at idle.

Last edited by hephaestus on 4 December 2019 at 6:53 pm UTC

0 Likes

Shmerl Dec 4, 2019

Link

View PC info

In the end, I stopped using custom profiles. And I set chipset fan mode to silent. It's runs at around 55-60°C on average load. When GPU blasts to 100%, it heats up the surrounding area, so it goes up to 75°C or even more sometimes.

0 Likes

hephaestus Dec 4, 2019

Link

Thanks.

How hot are these compared to "normal" chipset temps? This is my first time building a PC, so I have no point of comparison.

Do you worry at all about the temps wearing your motherboard out faster than normal?

Last edited by hephaestus on 4 December 2019 at 10:48 pm UTC

0 Likes

Shmerl Dec 4, 2019

Link

View PC info

I don't think it's a problem, unless it starts hitting something above 90°C or so. But you can contact Asrock to confirm it, I'd be interested in that too.

0 Likes

«2 /2

While you're here, please consider supporting GamingOnLinux on:

Reward Tiers: Patreon. Plain Donations:

PayPal.

This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!