⨯ Don't want to see articles from a certain category? When logged in, go to your User Settings and adjust your feed in the Content Preferences section where you can block tags!
  • Forum
  • Hardware
  • Anyone with Asrock X570 Taichi - can you see chipset temperature?
Anyone with Asrock X570 Taichi - can you see chipset temperature?
Page: «2/2
  Go to:
Shmerl Sep 8, 2019
Drivers wise, it's hard to say yet. The Witcher 3 in Wine+dxvk works well so far (I posted results in TW3 thread. So radv seems to work for it.

Something like The Bard's Tale IV for example hanged altogether. Possibly due to radeonsi for Navi still being rather fresh.
buono Sep 10, 2019
Thanks Shmerl, I appreciate the feedback.
pete910 Oct 6, 2019
@Shmerl

Finally got round to installing my x570t/3900x

This is what I've got up to now, Not sure if you've sussed yours since your last posts.

iwlwifi-virtual-0
Adapter: Virtual device
temp1:            N/A  

k10temp-pci-00c3
Adapter: PCI adapter
Tdie:         +36.4°C  (high = +70.0°C)                                         CPU Tdie
Tctl:         +36.4°C                                                           CPU Tctl

amdgpu-pci-1000
Adapter: PCI adapter
vddgfx:      737.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3850 RPM)
edge:         +31.0°C  (crit = +100.0°C, hyst = -273.1°C)                       GPU
                       (emerg = +105.0°C)
junction:     +35.0°C  (crit = +110.0°C, hyst = -273.1°C)                       Junction
                       (emerg = +115.0°C)
mem:          +32.0°C  (crit = +94.0°C, hyst = -273.1°C)                        HBM Mem Temp
                       (emerg = +99.0°C)
power1:       24.00 W  (cap = 250.00 W)                                         Power

nct6798-isa-0290
in0:                   496.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM 
in3:                     3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        
in4:                     1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                     1.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        CPU_VDDCR_SOC
in6:                     1.35 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        Dram
in7:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                  624.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM        PREM_VDDCR_SOC
in13:                  928.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM        VDDP
in14:                  904.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                   699 RPM  (min =    0 RPM)                               CPU FAN 1
fan3:                     0 RPM  (min =    0 RPM)                               Chassis Fan 1
fan4:                   349 RPM  (min =    0 RPM)
fan5:                  1283 RPM  (min =    0 RPM)                               Water Pump                              
fan6:                  1305 RPM  (min =    0 RPM)                               SB_Fan                                 
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +29.5°C    sensor = thermistor
CPUTIN:                 +30.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                 +8.0°C    sensor = thermistor
AUXTIN1:                -61.0°C    sensor = thermistor
AUXTIN2:                +13.0°C    sensor = thermistor
AUXTIN3:                +31.0°C    sensor = thermistor
SMBUSMASTER 1:          +50.0°C  (high = +105.0°C, hyst = +95.0°C)
SMBUSMASTER 0:          +36.0°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

Not sure if the Water pump and south bridge fans are the right way round.
Shmerl Oct 6, 2019
Yes, k10temp works fine now in 5.4-rc1+ for me. No need to patch it manually. Chipset temperature is SMBUSMASTER 1 for me.
pete910 Oct 6, 2019
Quoting: ShmerlYes, k10temp works fine now in 5.4-rc1+ for me. No need to patch it manually. Chipset temperature is SMBUSMASTER 1 for me.

Me too, Not sure why I didn't add that I used zenpower-git from the AUR to get K10temps

There's no data sheet for the NCT 6798 yet so no idea what to do the scaler at for the 12v rail ect

I think in7 is 3VSB, in8 is VBat and int 3 being 3VVC
pete910 Oct 6, 2019
To add I think SMBUSMASTER 0: is CPU temp too
hephaestus Dec 4, 2019
Quoting: ShmerlSapphire Pulse RX 5700XT by default has very passive fans profile, and runs quite hot on idle. Using radeon-profile I enabled better cooling fan curve, and chipset temperature went down! GPU is basically right in front of the flat heatsink on X570 Taichi, and when it's hot, it affects everything from the chipset to nvme drive that sit under that metal plate).

Hi Shmerl, I found this thread while Googling about the same problem.

What sort of chipset temperatures were you able to achieve by adjust the fan curve? I'm also getting 59 to 60 C chipset temps at idle.

Last edited by hephaestus on 4 December 2019 at 6:53 pm UTC
Shmerl Dec 4, 2019
In the end, I stopped using custom profiles. And I set chipset fan mode to silent. It's runs at around 55-60°C on average load. When GPU blasts to 100%, it heats up the surrounding area, so it goes up to 75°C or even more sometimes.
hephaestus Dec 4, 2019
Thanks.

How hot are these compared to "normal" chipset temps? This is my first time building a PC, so I have no point of comparison.

Do you worry at all about the temps wearing your motherboard out faster than normal?

Last edited by hephaestus on 4 December 2019 at 10:48 pm UTC
Shmerl Dec 4, 2019
I don't think it's a problem, unless it starts hitting something above 90°C or so. But you can contact Asrock to confirm it, I'd be interested in that too.
While you're here, please consider supporting GamingOnLinux on:

Reward Tiers: Patreon. Plain Donations: PayPal.

This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Login / Register

Or login with...
Sign in with Steam Sign in with Google
Social logins require cookies to stay logged in.
Register Forgot Login?
★ Support Us
Popular this week
Search or view by category
Contact
Buy Games
Buy games with our affiliate / partner links:
Latest Comments
Latest Forum Posts
Misc